PUMPS

You have two choices.

You can start with one of our basic pumps optimzied to your operating point with individually configured software settings.

or

You send us your operating specifications and we delivery a tailor-made solution which fits exactly to your requirements.

GET IN TOUCH FOR YOUR PERSONAL SOLUTION

BASIC PUMPS

Different conditions require different pressure or flow rates. We offer the right pump for various pressure ranges and flow rates. You can start with one of our basic pumps

PLUNGER PUMPS

Plunger Pump IFC 15-170

SMALL
146 x 62 x 83 mm
including ECU

LIGHTWEIGHT
670 g

POWERFUL
up to 170 bar

    • Pump: Plunger pump
    • Medium: Brake fluid
    • Engine: BLDC external rotor
    • Motor control: Sensored or self-sensing
    • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
    • Software:
        • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
        • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
    • Hydraulic connections: -03 JIC (other connections available)
    • Electric connections: Souriau 8STA 0 12-26 PN, on vehicle side 8STA 6 12-26 SN
    • Mounting: 3 screws M5

Length:

    • 146 mm without hydraulic connections, without fixation points
    • 156 mm without hydraulic connections, with fixation points

Width

    • 62 mm without fixation points
    • 81 mm with fixation points
    • 89 mm with fixation points and electrical connection

Height

    • 83 mm

SCREW PUMPS

Screw Pump IFC 800-3

SMALL
123 x 63 x 82 mm
including ECU

LIGHTWEIGHT
400 g

POWERFUL
13 l/min @ 3 bar

The screw pump is characterized by the following features:

  • Delivery volume proportional to speed
  • Delivery volume almost independent of back pressure
  • Delivery volume almost independent of the viscosity of the medium
  • High efficiency compared to similar technologies (e.g., Gerotor)
  • Reversible direction of rotation/pumping direction
  • Pump: Displacement pump (screw pump)
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature, and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -10 Wiggins tube connectors (other connections, e.g., JIC available)
  • Electric connections: 8STA0 10-98 PN, on vehicle side 8STA6 10-98 SN
  • Mounting: 4 M5 screws
    • Length: 123 mm
    • Width: 63 mm
    • Height: 82 mm

Screw Pump IFC 360-3

SMALL
130 x 84 x 63 mm
including ECU

LIGHTWEIGHT
335 g

POWERFUL
6 l/min @ 3 bar

The screw pump is characterized by the following features:

  • Delivery volume proportional to speed
  • Delivery volume almost independent of back pressure
  • Delivery volume almost independent of the viscosity of the medium
  • High efficiency compared to similar technologies (e.g., Gerotor)
  • Reversible direction of rotation/pumping direction
  • Pump: Displacement pump (screw pump)
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature, and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -08 Wiggins tube connectors (other connections, e.g., JIC available)
  • Electric connections: 8STA0 10-98 PN, on vehicle side 8STA6 10-98 SN
  • Mounting: 4 M5 screws
    • Length: 130 mm (with electric connection 144 mm)
    • Width: 84 mm
    • Height: 63 mm

GEROTOR PUMPS

Gerotor Pump IFC 210-3

SMALL
108 x 66.5 x 56 mm
including ECU

LIGHTWEIGHT
300 g

POWERFUL
up to 3.6 l/min @ 3 bar

  • Pump: Displacement pump (gerotor), self-priming
  • Medium: Oil, dielectric media
  • Engine: BLDC, external rotor
  • Motor control: Self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: Push-in fitting with retaining plate according to customer specification
  • Electric connections: Souriau 8STA0 12-26 PN, on vehicle side 8STA6 12-26 SN
  • Mounting: 4 M4 screws
    • Length: 108 mm
    • Width: 66.5 mm
    • Height: 56 mm (with electric connection: 70 mm)

PEEK Pump IFC 600-3

SMALL
118 x 80 x 62 mm
including ECU

LIGHTWEIGHT
310 g

POWERFUL
10 l/min @ 3 bar

  • Pump: Displacement pump (gerotor)
  • Medium: Oil, dielectric media, water
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature, and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -08 Wiggins tube connectors (other connections, e.g., JIC available)
  • Electric connections: 8STA0 10-98 PN, on vehicle side 8STA6 10-98 SN
  • Mounting: 4 M4 screws
    • Length: 118 mm
    • Width: 80 mm
    • Height: 62 mm

Gerotor Pump IFC 600-1

SMALL
100 x 80 x 62 mm
including ECU

LIGHTWEIGHT
375 g

POWERFUL
up to 10 l/min @ 1 bar

  • Pump: Displacement pump (gerotor), self-priming
  • Medium: Oil, dielectric media
  • Engine: BLDC, external rotor
  • Motor control: Self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -08 JIC (other connections available)
  • Electric connections: Souriau 8STA0 12-26 PN, on vehicle side 8STA6 12-26 SN
  • Mounting: 4 M4 screws
    • Length: 100 mm (with electric connection: 113 mm)
    • Width: 80 mm (with -08 JIC: 108 mm)
    • Height: 62 mm

PEEK Pump IFC 1100-2

SMALL
107 x 92 x 81 mm
including ECU

LIGHTWEIGHT
660 g

POWERFUL
19 l/min @ 2 bar

  • Pump: Displacement pump (gerotor)
  • Medium: Oil, dielectric media, water
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -08 Wiggins tube connectors (other connections, e.g. JIC available)
  • Electric connections: 8STA0 10-98 PN, on vehicle side 8STA6 10-98 SN
  • Mounting: 3 M5 screws
    • Length: 107 mm
    • Width: 92 mm
    • Height: 81 mm

PEEK Pump IFC 1100-3

SMALL
117 x 92 x 89 mm
including ECU

LIGHTWEIGHT
750 g

POWERFUL
up to 19 l/min @ 3 bar

  • Pump: Displacement pump (gerotor)
  • Medium: Oil, dielectric media, water
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -08 Wiggins tube connectors (other connections, e.g. JIC available)
  • Electric connections: 8STA0 12-26 PN, on vehicle side 8STA6 12-26 SN
  • Mounting: 3 M5 screws
    • Length: 117 mm
    • Width: 92 mm
    • Height: 89 mm

 Gerotor Pump  IFC 540-3

SMALL
151 x  55 x 74 mm
including ECU

LIGHTWEIGHT
920 g

POWERFUL
up to 9 l/min @ 3 bar

  • Pump: Displacement pump (gerotor)
  • Medium: Oil, dielectric media
  • Engine: BLDC internal rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -08 Wiggins tube connectors (other connections, e.g., JIC available)
  • Electric connections: Souriau plug according to customer requirements
    • Length: XX mm
    • Width: XX mm
    • Height: XX mm (with electric connection: 70 mm)

Gerotor Pump IFC 1200-3

SMALL
142 x 101 x 90 mm
including ECU

LIGHTWEIGHT
1200 g

POWERFUL
up to 20 l/min @ 3 bar

  • Pump: Gerotor pump
  • Medium: Oil, dielectric media
  • Engine: BLDC, external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -12 JIC (other connections available)
  • Electric connections: Souriau 8STA0 12-26 PN, on vehicle side 8STA6 12-26 SN
  • Mounting: 4 M6 screws
    • Length: 142 mm (without electrical connection)
    • Width: 101 mm (with mounting tabs, without hydraulic connections)
    • Height: 90 mm

PEEK Pump IFC 2400-3

SMALL
136 x 120 x 132 mm
including ECU

LIGHTWEIGHT
1600 g

POWERFUL
up to 40 l/min @ 3 bar

  • Pump: Displacement pump (gerotor), self-priming
  • Medium: Oil, dielectric media, water
  • Engine: BLDC external rotor
  • Motor control: Sensored or self-sensing
  • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
  • Software:
    • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
    • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
  • Hydraulic connections: -16 Wiggins tube connectors (other connections, e.g. JIC available)
  • Electric connections: Souriau 8STA0 16-20 PN, on vehicle side 8STA6 16-20 SN
    • Length:  136 mm
    • Width:  120 mm
    • Height: 132 mm

CENTRIFUGAL PUMPS

Centrifugal Pump IFC 1600-1

SMALL
146 x 86 x 64 mm
including ECU

LIGHTWEIGHT
370 g

POWERFUL
up to 27 l/min @ 1.0 bar

    • Pump: Centrifugal pump
    • Engine: BLDC, external rotor
    • Motor control: Self-sensing
    • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
    • Software:
      • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
      • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
    • Hydraulic connections: -10 Wiggins tube connectors
    • Electric connections: 8STA0 10-98 PN, on vehicle side 8STA6 10-98 SN
    • Mounting: 4 M5 screws
    • Length: 131 mm (with electric connection: 146 mm)
    • Width: 86 mm
    • Height: 64 mm

Centrifugal Pump IFC 1800-1

SMALL
108 x 80 x 63 mm
including ECU

LIGHTWEIGHT
300 g

POWERFUL
up to 30 l/min @ 1.0 bar

    • Pump: Centrifugal pump
    • Medium: Water, oil
    • Engine: BLDC, external rotor
    • Motor control: Self-sensing
    • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
    • Software:
      • Intelligent performance control depending on load status, processor temperature, and ambient/medium temperature
      • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
    • Hydraulic connections: -10 Wiggins tube connectors
    • Electric connections: 8STA0 10-98 PN, on vehicle side 8STA6 10-98 SN
    • Mounting: 4 M5 screws
    • Length: 108 mm (with electric connection: 123 mm)
    • Width: 80 mm
    • Height: 63 mm

Centrifugal Pump IFC 3000-1

SMALL
109 x 84 x 76 mm
including ECU

LIGHTWEIGHT
350 g

POWERFUL
up to 80 l/min (up to 1.6 bar)

    • Pump: Centrifugal pump
    • Medium: Water or dielectric media
    • Engine: BLDC, external rotor
    • Motor control: Self-sensing
    • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
    • Software:
        • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
        • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
    • Hydraulic connections: -16 Wiggins tube connectors
    • Electric connections: 8STA0 10-98 PN, on vehicle side 8STA6 10-98 SN
    • Mounting: 4 M4 screws
    • Length: 109 mm (with electric connection: 124 mm)
    • Width: 84 mm
    • Height: 76 mm

Centrifugal Pump IFC 3600-2

SMALL
143 x 75 x 79,5 mm
including ECU

LIGHTWEIGHT
765 g

POWERFUL
up to 100 l/min (up to 2.5 bar)

    • Pump: Centrifugal pump
    • Medium: Water or dielectric media
    • Engine: BLDC external rotor
    • Motor control: Sensored or self-sensing
    • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
    • Software:
        • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
        • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
    • Hydraulic connections: -16 Wiggins tube connectors
    • Electric connections: Souriau 8STA 0 12-26 PN, on vehicle side 8STA 6 12-26 SN
    • Mounting: 4 screws M6
    • Length: 160 mm with plug, 143 mm without plug
    • Width: 101 mm with fixation points, 75 mm without fixation points
    • Height: 98 mm Max, 79,5 Min

Centrifugal Pump IFC 8000-3

COMPACT
178 x 127 x 111 mm
including ECU

LIGHTWEIGHT
1130 g

POWERFUL
up to 134 l/min @ 3 bar

    • Pump: Centrifugal pump
    • Engine: BLDC, external rotor
    • Motor control: Self-sensing
    • Control electronics: Customer-specific interfaces (CAN, LIN, UART, etc.), alternatively, ON/OFF
    • Software:
      • Intelligent performance control depending on load status, processor temperature and ambient/medium temperature
      • To integrate our product into the CAN vehicle architecture, we automatically supply the DBC-file if required
    • Hydraulic connections: -20 Wiggins tube connectors
    • Electric connections:
      • Power: 8STA0 16-75 PN251, on vehicle side 8STA6 16-75 SN251
      • Control: 8STA0 02-05 SN, on vehicle side 8STA6 02-05 PN
    • Mounting: 3 M6 screws
    • Length: 178 mm
    • Width: 124 mm (with electric connection: 127 mm)
    • Height: 111 mm

SEB_Centrifugal Pump IFC 8000-3

It is our objective to find the best solution for your application.

Give us your specific requirements, and we will tailor our development to meet your needs.

GET IN TOUCH FOR YOUR PERSONAL SOLUTION